SCHNEIDER
Acti9 Smartlink - Modbus RS485 slave - smart communication I/O module - A9XMSB11
A9XMSB11
€250.44 Excl. Tax
€300.53 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
In stock more than 25 units – Dispatched within 24/48h
- Technical support and dedicated single point of contact
- Free delivery from 200€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range of product: | Acti 9 |
|---|---|
| Range: | Acti 9 |
| Product name: | Acti 9 Smartlink |
| Product or component type: | Smart communication module |
| Device short name: | Smartlink Modbus |
| Device application: | Load controlBreaker status monitoringBasic energy metering E |
| Connected auxiliaries: | Up to 11 wired devices |
| Group of channels: | 1 group of 11 digital channels |
| Maximum supply current: | 1.5 A |
| [Us] rated supply voltage: | 24 V DC +/- 20 % |
| Connectivity to devices: | Digital input and outputPulse output meter |
| Communication service: | Modbus slave for RS485 |
| Web server: | BMS controller compatible |
| Web services: | Web page |
| Application specific I/O: | Pulse totalising counterPulse converter |
|---|---|
| Protection type: | Short-circuit protection for analog inputAgainst reverse polarity for auxiliary supplyAgainst reverse polarity for inputOvervoltage at 33 V DC for digital output |
| Immunity to microbreaks: | 10 ms |
| Reset: | Factory reset on front face |
| Input/output type: | 2 inputs + 1 output per digital channel |
| Input type: | Current sink for digital input, 24 V DC +/- 20 % at 2.5 mA |
| Maximum permanent current: | 5 mA for digital input |
| Electronic filtering time: | 2 ms for digital input from state 0 to state 1 |
| Output type: | Logic current source: 24 V - DC - 100 mA |
| Maximum voltage drop: | |
| Inrush current: | 0.5 A for digital output3 A for power supply |
| Local signalling: | Communication: 1 LED (yellow)Status: 1 LED (green, orange and red) |
| Type of setting: | Modbus address 01...99 for address encodersReset for address encodersReset for plug in, plug out the auxiliary supply |
| Mounting position: | Horizontal and vertical on DIN rail |
| Colour: | White (RAL 9003) |
| Location of connection: | Front |
| Connections - terminals: | Spring-loaded terminal Ti24 qty: 11 for digital input/output, ordered separatelyPlug-in connector qty: 1 for supply circuitPlug-in connector qty: 1 for communication bus |
| Clamping connection capacity: | 2 x 0.25 mm² for twisted shielded pairs cable, flexible with cable end for communication bus2 x 0.25 mm² for twisted shielded pairs cable, flexible without cable end for communication bus2 x 0.25 mm² for twisted shielded pairs cable, rigid with cable end for communication bus2 x 0.25 mm² for twisted shielded pairs cable, rigid without cable end for communication bus1 x 0.5...1 x 1.5 mm², flexible with cable end for control1 x 0.5...1 x 1.5 mm², flexible without cable end for control1 x 0.5...1 x 1.5 mm², rigid with cable end for control1 x 0.5...1 x 1.5 mm², rigid without cable end for control2 x 0.2...2 x 1.5 mm², flexible with cable end for supply circuit2 x 0.2...2 x 1.5 mm², flexible without cable end for supply circuit2 x 0.2...2 x 1.5 mm², rigid with cable end for supply circuit2 x 0.2...2 x 1.5 mm², rigid without cable end for supply circuit |
| Wire stripping length: | Control: 10 mmSupply circuit: 7 mmCommunication bus: 7 mm |
| Communication network type: | RS485 Modbus RTU slave SUB-D 9 9.6...19.2 kbauds |
| 9 mm pitches: | 0 useful |
| Height: | 22.5 mm |
| Width: | 359 mm |
| Depth: | 42 mm |
| Product weight: | 195 g |
| Provided equipment: | Set of 1 bus connectorSet of 1 power supply connectorSet of 2 locking clips |
| Range compatibility: | iTL auxiliaryLinergy FM iOF+SD 24 iACT24 iATL24 pulse output meter RCA iC60Acti 9 iCT auxiliaryActi 9 iC60Acti 9 iIDActi 9 iSW-NAActi 9 iDPN VigiActi 9 C40Multi 9 C60Acti 9 DT40Acti 9 DT60Acti 9 I-NAActi 9 ITG40Acti 9 iDPNActi 9 Reflex iC60 Ti24 connector |
| Commissioning interface: | ECOREACHWeb page |
| Market segment: | ResidentialSmall commercial |
| Compatibility code: | Acti 9 Smartlink |
In short
Reference A9XMSB11
Product Name Acti9 Smartlink - Modbus RS485 slave - smart communication I/O module - A9XMSB11
Range Acti 9
Device function Surveillance de l'état du disjoncteur
Mesure d'énergie de base E
Contrôle de charge
Mesure d'énergie de base E
Contrôle de charge
Related Categories
