SCHNEIDER
soft starter-ATS22-control 220V-power 230V(18.5kW)/400...440V(37kW) - ATS22D75Q
ATS22D75Q
€1,103.62 Excl. Tax
€1,324.34 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
In stock – Dispatched within 24/48h
- Technical support and dedicated single point of contact
- Free delivery from 200€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range of product: | Altistart 22 |
|---|---|
| Product or component type: | Soft starter |
| Product destination: | Asynchronous motors |
| Product specific application: | Pumps and fans |
| Component name: | ATS22 |
| Network number of phases: | 3 phases |
| [Us] rated supply voltage: | 230...440 V - 15...10 % |
| Motor power kW: | 37 kW 400 V37 kW 440 V18.5 kW 230 V |
| Factory setting current: | 69 A |
| Power dissipation in W: | 63 W for standard applications |
| Utilisation category: | AC-53A |
| Type of start: | Start with torque control (current limited to 3.5 In) |
| IcL starter rating: | 75 A for connection in the motor supply line for standard applications |
| IP degree of protection: | IP20 |
| Assembly style: | With heat sink |
|---|---|
| Function available: | Internal bypass |
| Supply voltage limits: | 195...484 V |
| Supply frequency: | 50...60 Hz - 10...10 % |
| Network frequency: | 45...66 Hz |
| Device connection: | In the motor supply lineTo the motor delta terminals |
| [Uc] control circuit voltage: | 230 V - 15...10 % 50/60 Hz |
| Control circuit consumption: | 20 W |
| Discrete output number: | 2 |
| Discrete output type: | Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/ORelay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O |
| Minimum switching current: | 100 mA at 12 V DC (relay outputs) |
| Maximum switching current: | 5 A 250 V AC resistive 1 relay outputs5 A 30 V DC resistive 1 relay outputs2 A 250 V AC inductive 0.4 20 ms relay outputs2 A 30 V DC inductive 7 ms relay outputs |
| Discrete input number: | 3 |
| Discrete input type: | (LI1, LI2, LI3) logic, 5 mA 4.3 kOhm |
| Discrete input voltage: | 24 V |
| Discrete input logic: | Positive logic LI1, LI2, LI3 at State 0: 11 V, >= 5 mA |
| Output current: | 0.4...1 Icl adjustable |
| PTC probe input: | 750 Ohm |
| Communication port protocol: | Modbus |
| Connector type: | 1 RJ45 |
| Communication data link: | Serial |
| Physical interface: | RS485 multidrop |
| Transmission rate: | 4800, 9600 or 19200 bps |
| Installed device: | 31 |
| Protection type: | Phase failure: lineThermal protection: motorThermal protection: starter |
| Marking: | CE |
| Type of cooling: | Forced convection |
| Operating position: | Vertical +/- 10 degree |
| Height: | 295 mm |
| Width: | 145 mm |
| Depth: | 207 mm |
| Product weight: | 12 kg |
| Power range: | 15...25 kW at 200...240 V 3 phases30...50 kW at 380...440 V 3 phases |
| Motor starter type: | Soft starter |
In short
Reference ATS22D75Q
Product Name soft starter-ATS22-control 220V-power 230V(18.5kW)/400...440V(37kW) - ATS22D75Q
Our customers also bought
Related Categories
