SCHNEIDER
variable speed drive, ATV320, 1.5 kW, 380…500 V, 3 phases, compact - ATV320U15N4C
ATV320U15N4C
€484.93 Excl. Tax
€581.92 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
In stock more than 25 units – Dispatched within 24/48h
- Technical support and dedicated single point of contact
- Free delivery from 200€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range of product: | Altivar Machine ATV320 |
|---|---|
| Product or component type: | Variable speed drive |
| Product specific application: | Complex machines |
| Variant: | Standard version |
| Format of the drive: | Compact |
| Network number of phases: | 3 phases |
| Design of frequency changer: | U converter |
| Mounting mode: | Wall mount |
| Communication port protocol: | Modbus serialCANopen |
| Option card: | Communication module, CANopenCommunication module, EtherCATCommunication module, Profibus DP V1Communication module, ProfinetCommunication module, Ethernet PowerlinkCommunication module, EtherNet/IPCommunication module, DeviceNet |
| [Us] rated supply voltage: | 380...500 V - 15...10 % |
| [Us] rated supply voltage: | 380...500 V |
| Relative symmetric mains voltage tolerance: | 10 % |
| Nominal output current: | 4.1 A |
| Number of input phases: | 3 |
| Number of output phases: | 3 |
| Motor power kW: | 1.5 kW for heavy duty |
| EMC filter: | Class C2 EMC filter integrated |
| IP degree of protection: | IP20 |
| Discrete input number: | 7 |
|---|---|
| Discrete input type: | STO safe torque off, 24 V DC, impedance: 1.5 kOhmDI1...DI6 logic inputs, 24 V DC (30 V)DI5 programmable as pulse input: 0...30 kHz, 24 V DC (30 V) |
| Discrete input logic: | Positive logic (source)Negative logic (sink) |
| Discrete output number: | 3 |
| Discrete output type: | Open collector DQ+ 0...1 kHz 30 V DC 100 mAOpen collector DQ- 0...1 kHz 30 V DC 100 mA |
| Analogue input number: | 3 |
| Analogue input type: | AI1 voltage: 0...10 V DC, impedance: 30 kOhm, resolution 10 bitsAI2 bipolar differential voltage: +/- 10 V DC, impedance: 30 kOhm, resolution 10 bitsAI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits |
| Analogue output number: | 1 |
| Analogue output type: | Software-configurable current AQ1: 0...20 mA impedance 800 Ohm, resolution 10 bitsSoftware-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm, resolution 10 bits |
| Relay output type: | Configurable relay logic R1A 1 NO electrical durability 100000 cyclesConfigurable relay logic R1B 1 NC electrical durability 100000 cyclesConfigurable relay logic R1CConfigurable relay logic R2A 1 NO electrical durability 100000 cyclesConfigurable relay logic R2C |
| Number of inputs, bidirectional, not potential-free: | 0 |
| Number of inputs, potential-free: | 0 |
| Maximum switching current: | Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 250 V ACRelay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 30 V DCRelay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V ACRelay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DCRelay output R2A, R2C on resistive load, cos phi = 1: 5 A at 250 V ACRelay output R2A, R2C on resistive load, cos phi = 1: 5 A at 30 V DC |
| Minimum switching current: | Relay output R1A, R1B, R1C, R2A, R2C: 5 mA at 24 V DC |
| Encoder protocol: | RS 422 |
| Computer port: | True |
| Optical interface present: | False |
| Method of access: | Slave CANopen |
| Number of HW interfaces parallel: | 0.0 |
| Number of HW interfaces industrial Ethernet: | 0.0 |
| Number of HW interfaces PROFINET: | 0.0 |
| Number of HW interfaces serial RS232: | 0.0 |
| Number of HW interfaces serial RS422: | 0.0 |
| Number of HW interfaces serial RS485: | 1.0 |
| Number of HW interfaces serial TTY: | 0.0 |
| Number of HW interfaces USB: | 0.0 |
| Number of HW interfaces other: | 1.0 |
| Supporting protocol for AS-Interface Safety at Work: | False |
| Supporting protocol for ASI: | False |
| Supporting protocol for SUCONET: | False |
| Supporting protocol for BACnet: | False |
| Supporting protocol for CAN: | True |
| Supporting protocol for Data-Highway: | False |
| Supporting protocol for DeviceNet: | True |
| Supporting protocol for DeviceNet Safety: | False |
| Supporting protocol for EtherNet/IP: | True |
| Supporting protocol for Foundation Fieldbus: | False |
| Supporting protocol for INTERBUS: | False |
| Supporting protocol for INTERBUS-Safety: | False |
| Supporting protocol for KNX: | False |
| Supporting protocol for LON: | False |
| Supporting protocol for MODBUS: | True |
| Supporting protocol for other bus systems: | True |
| Supporting protocol for PROFIBUS: | True |
| Supporting protocol for PROFINET CBA: | False |
| Supporting protocol for PROFINET IO: | True |
| Supporting protocol for PROFIsafe: | False |
| Supporting protocol for SafetyBUS P: | False |
| Supporting protocol for SERCOS: | False |
| Supporting protocol for TCP/IP: | True |
| 4 quadrant operation possible: | True |
| Asynchronous motor control profile: | Voltage/frequency ratio, 5 pointsFlux vector control without sensor, standardVoltage/frequency ratio - Energy Saving, quadratic U/fFlux vector control without sensor - Energy SavingVoltage/frequency ratio, 2 points |
| Synchronous motor control profile: | Vector control without sensor |
| Maximum output frequency: | 0.599 kHz |
| Transient overtorque: | 170...200 % of nominal motor torque |
| Acceleration and deceleration ramps: | LinearUSCUSRamp switchingAcceleration/deceleration ramp adaptationAcceleration/deceleration automatic stop with DC injection |
| Motor slip compensation: | Automatic whatever the loadAdjustable 0...300 %Not available in voltage/frequency ratio (2 or 5 points) |
| Switching frequency: | 2...16 kHz adjustable4...16 kHz with derating factor |
| Nominal switching frequency: | 4 kHz |
| Braking to standstill: | By DC injection |
| Brake chopper integrated: | True |
| Maximum associated fuse rating: | 12.0 A |
| Line current: | 6.4 A at 380 V (heavy duty)4.9 A at 500 V (heavy duty) |
| Maximum input current: | 6.4 A |
| Maximum output voltage: | 500 V |
| Nominal output power: | 1.5 kW |
| Apparent power: | 4.2 kVA at 500 V (heavy duty) |
| Capacity of DC link: | 235.0 µF |
| Network frequency: | 50...60 Hz |
| Relative symmetric network frequency tolerance: | 5 % |
| Prospective line Isc: | 5 kA |
| 1 phase low current possible: | False |
| Base load current at high overload: | 3.0 A |
| Application in domestic and commercial area permitted: | False |
| Application in industrial area permitted: | True |
| EMC limit value (complied): | True |
| Power loss per device current dependent: | 56.0 W |
| Power loss static current independent: | 56.0 W |
| Power dissipation in W: | Fan: 56.0 W at 380 V, switching frequency 4 kHz |
| Housing material: | Plastic |
| With safety function Safely Limited Speed (SLS): | True |
| With safety function Safe brake management (SBC/SBT): | False |
| With safety function Safe Operating Stop (SOS): | False |
| With safety function Safe Position (SP): | False |
| With safety function Safe programmable logic: | False |
| With safety function Safe Speed Monitor (SSM): | False |
| With safety function Safe Stop 1 (SS1): | True |
| With sft fct Safe Stop 2 (SS2): | False |
| With safety function Safe torque off (STO): | True |
| With safety function Safely Limited Position (SLP): | False |
| With safety function Safe Direction (SDI): | False |
| Protection type: | Input phase breaks: driveOvercurrent between output phases and earth: driveOverheating protection: driveShort-circuit between motor phases: driveThermal protection: drive |
| Operating element present: | True |
| Width: | 105.0 mm |
| Height: | 142.0 mm |
| Depth: | 158.0 mm |
| Product weight: | 1.3 kg |
| Linearity error: | AI1, AI2, AI3: +/- 0.2...0.5 % of maximum value for analog inputAQ1: +/- 0.3 % for analog output |
| Accuracy: | +/- 0.7 % AI1, AI2, AI3 for a temperature of -10...60 °C analog input+/- 0.5 % AI1, AI2, AI3 for a temperature of 25 °C analog input+/- 1 % AQ1 for a temperature of 25 °C analog output+/- 2 % AQ1 for a temperature of -10...60 °C analog output |
| Sampling duration: | 2 ms (AI1, AI2, AI3) - analog input2 ms (AQ1) - analog output |
| Refresh time: | Logic input (DI1...DI4): 8 msRelay output (R1A, R1B, R1C): 2 msRelay output (R2A, R2C): 2 ms |
In short
Reference ATV320U15N4C
Product Name variable speed drive, ATV320, 1.5 kW, 380…500 V, 3 phases, compact - ATV320U15N4C
Related Categories
