SCHNEIDER

variable speed drive ATV630 - 0.75kW/1HP - 380...480V - IP21/UL type 1 - ATV630U07N4

Name: variable speed drive ATV630 - 0.75kW/1HP - 380...480V - IP21/UL type 1 - ATV630U07N4
SKU: ATV630U07N4
Price: 827.04 EUR
Availability: InStock

ATV630U07N4

€689.20 Excl. Tax

€827.04 Inc. Tax

In stock – Dispatched within 24/48h

Technical support and dedicated single point of contact
Free delivery from 200€ of purchase (Metropolitan France)
100% secure payments

In short
Compatible with
Features
Details
Infos
Return
We recommend

Technical informations

Range of product:	Altivar Process ATV600
Product or component type:	Variable speed drive
Product specific application:	Process and utilities
Device short name:	ATV630
Variant:	Standard version
Product destination:	Asynchronous motorsSynchronous motors
EMC filter:	Integrated with 50 m conforming to EN/IEC 61800-3 category C2Integrated with 150 m conforming to EN/IEC 61800-3 category C3
IP degree of protection:	IP21 conforming to IEC 61800-5-1IP21 conforming to IEC 60529
[Us] rated supply voltage:	380...480 V
Degree of protection:	UL type 1 conforming to UL 508C
Type of cooling:	Forced convection
Supply frequency:	50...60 Hz - 5...5 %
[Us] rated supply voltage:	380...480 V - 15...10 %
Motor power kW:	0.75 kW (normal duty)0.37 kW (heavy duty)
Motor power hp:	1 hp normal duty0.5 hp heavy duty
Line current:	1.5 A at 380 V (normal duty)1.3 A at 480 V (normal duty)0.9 A at 380 V (heavy duty)0.8 A at 480 V (heavy duty)
Prospective line Isc:	50 kA
Apparent power:	1.1 kVA at 480 V (normal duty)0.7 kVA at 480 V (heavy duty)
Continuous output current:	2.2 A at 4 kHz for normal duty1.5 A at 4 kHz for heavy duty
Maximum transient current:	2.4 A during 60 s (normal duty)2.3 A during 60 s (heavy duty)
Asynchronous motor control profile:	Constant torque standardVariable torque standardOptimized torque mode
Synchronous motor control profile:	Permanent magnet motorSynchronous reluctance motor
Speed drive output frequency:	0.1...500 Hz
Nominal switching frequency:	4 kHz
Switching frequency:	2...12 kHz adjustable4...12 kHz with derating factor
Safety function:	STO (safe torque off) SIL 3
Discrete input logic:	16 preset speeds
Communication port protocol:	Modbus TCPEthernetModbus serial
Option card:	Slot A: communication module, Profibus DP V1Slot A: communication module, ProfinetSlot A: communication module, DeviceNetSlot A: communication module, Modbus TCP/EtherNet/IPSlot A: communication module, CANopen daisy chain RJ45Slot A: communication module, CANopen SUB-D 9Slot A: communication module, CANopen screw terminalsSlot A/slot B: digital and analog I/O extension moduleSlot A/slot B: output relay extension moduleSlot A: communication module, Ethernet IP/Modbus TCP/MD-LinkCommunication module, BACnet MS/TPCommunication module, Ethernet Powerlink

Design of frequency changer:	U converter
Network frequency:	50...60 Hz
Ambient air transport temperature:	-40...70 °C
Relative symmetric mains voltage tolerance:	10 %
Maximum output voltage:	480.0 V
Relative symmetric network frequency tolerance:	5 %
Maximum acceleration under shock impact (during operation):	150 m/s² at 11 ms
Permitted relative humidity (during operation):	Class 3K5 according to EN 60721-3
Maximum acceleration under vibrational stress (during operation):	10 m/s² at 13...200 Hz
Nominal output power:	0.75 W
4 quadrant operation possible:	False
Permitted relative humidity (during transport):	Class 2K5 according to EN 60721-3
Permitted relative humidity (during storage):	Class 1K5 according to EN 60721-3
Capacity of DC link:	235.0 µF
Maximum deflection under vibratory load (during operation):	1.5 mm at 2...13 Hz
Operating element present:	True
Number of HW interfaces serial TTY:	0
Power loss per device current dependent:	50.0 W
Power loss static current independent:	14.0 W
Number of output phases:	3
Maximum acceleration under vibratory load (during transport):	10 m/s² at 13...200 Hz
Number of input phases:	3
Number of inputs, potential-free:	0
Maximum deflection under vibratory load (during transport):	1.5 mm at 2...13 Hz
Brake chopper integrated:	False
Maximum acceleration under shock load (during transport):	150 m/s² at 11 ms
Number of HW interfaces USB:	0
Number of HW interfaces other:	0
Optical interface present:	False
Computer port:	True
Supporting protocol for TCP/IP:	True
Application in industrial area permitted:	True
Application in domestic and commercial area permitted:	False
Supporting protocol for PROFIBUS:	True
Number of HW interfaces industrial Ethernet:	1
Number of inputs, bidirectional, not potential-free:	0
1 phase low current possible:	False
Number of HW interfaces parallel:	0
Supporting protocol for KNX:	False
Supporting protocol for ASI:	False
Number of HW interfaces PROFINET:	0
Supporting protocol for CAN:	True
Supporting protocol for INTERBUS:	False
Supporting protocol for DeviceNet:	False
Supporting protocol for SUCONET:	False
Supporting protocol for LON:	False
Supporting protocol for MODBUS:	True
Supporting protocol for Data-Highway:	False
Supporting protocol for PROFINET IO:	True
Supporting protocol for PROFINET CBA:	True
Maximum acceleration under shock load (during storage):	150 m/s² at 11 ms
Supporting protocol for Foundation Fieldbus:	False
Supporting protocol for SERCOS:	False
Maximum deflection under vibratory load (during storage):	1.5 mm at 2...13 Hz
Supporting protocol for DeviceNet Safety:	False
Supporting protocol for INTERBUS-Safety:	False
Supporting protocol for PROFIsafe:	False
Supporting protocol for EtherNet/IP:	True
Supporting protocol for AS-Interface Safety at Work:	False
Maximum acceleration under vibratory load (during storage):	10 m/s² at 13...200 Hz
With safety function Safe torque off (STO):	True
With sft fct Safe Stop 2 (SS2):	False
With safety function Safe Stop 1 (SS1):	False
Supporting protocol for SafetyBUS P:	False
Supporting protocol for BACnet:	False
Supporting protocol for other bus systems:	False
Nominal output current:	2.2 A
With safety function Safe brake management (SBC/SBT):	False
With safety function Safe Operating Stop (SOS):	False
With safety function Safely Limited Position (SLP):	False
With safety function Safely Limited Speed (SLS):	False
With safety function Safe Speed Monitor (SSM):	False
With safety function Safe Direction (SDI):	False
Base load current at high overload:	1.5 A
Base load current at low overload:	2.2 A
Number of HW interfaces serial RS232:	0
With safety function Safe programmable logic:	False
With safety function Safe Position (SP):	False
EMC limit value (complied):	True
Environmental class (during transport):	Class 2C3 according to EN 60721-3-2Class 2S1 according to EN 60721-3-2
Environmental class (during operation):	Class 3C3 according to IEC 60721-3-3Class 3S3 according to IEC 60721-3-3
Environmental class (during storage):	Class 1C3 according to EN 60721-3-1Class 1S2 according to EN 60721-3-1
Number of HW interfaces serial RS422:	0
Number of HW interfaces serial RS485:	1
Mounting mode:	Wall mount
Network number of phases:	3 phases
Discrete output number:	0
Discrete output type:	Relay outputs R1A, R1B, R1C 250 V AC 3000 mARelay outputs R1A, R1B, R1C 30 V DC 3000 mARelay outputs R2A, R2C 250 V AC 5000 mARelay outputs R2A, R2C 30 V DC 5000 mARelay outputs R3A, R3C 250 V AC 5000 mARelay outputs R3A, R3C 30 V DC 5000 mA
Output voltage:
Permissible temporary current boost:	1.1 x In during 60 s (normal duty)1.5 x In during 60 s (heavy duty)
Motor slip compensation:	Not available in permanent magnet motor lawCan be suppressedAutomatic whatever the loadAdjustable
Acceleration and deceleration ramps:	Linear adjustable separately from 0.01...9999 s
Physical interface:	Ethernet2-wire RS 485
Braking to standstill:	By DC injection
Protection type:	Thermal protection: motorSafe torque off: motorMotor phase break: motorThermal protection: driveSafe torque off: driveOverheating: driveOvercurrent between output phases and earth: driveOverload of output voltage: driveShort-circuit protection: driveMotor phase break: driveOvervoltages on the DC bus: driveLine supply overvoltage: driveLine supply undervoltage: driveLine supply phase loss: driveOverspeed: driveBreak on the control circuit: drive
Transmission rate:	10, 100 Mbits4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Frequency resolution:	Display unit: 0.1 HzAnalog input: 0.012/50 Hz
Transmission frame:	RTU
Electrical connection:	Control: removable screw terminals 0.5...1.5 mm²/AWG 20...AWG 16Motor: screw terminal 2.5...6 mm²/AWG 14...AWG 10Line side: screw terminal 2.5...6 mm²/AWG 14...AWG 10
Connector type:	RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCPRJ45 (on the remote graphic terminal) for Modbus serial
Data format:	8 bits, configurable odd, even or no parity
Type of polarization:	No impedance
Exchange mode:	Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
Number of addresses:	1...247 for Modbus serial
Method of access:	Slave Modbus TCP
Supply:	External supply for digital inputs: 24 V DC (19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO: 24 V DC (21...27 V),
Local signalling:	3 LEDs for local diagnostic3 LEDs (dual colour) for embedded communication status4 LEDs (dual colour) for communication module status1 LED (red) for presence of voltage
Width:	144 mm
Height:	350 mm
Depth:	203 mm
Product weight:	4.5 kg
Analogue input number:	3
Analogue input type:	AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bitsAI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bitsAI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
Discrete input number:	8
Discrete input type:	DI7, DI8 programmable as pulse input: 0...30 kHz, 24 V DC (
Input compatibility:	DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
Discrete input logic:	Positive logic (source) (DI1...DI8), 11 V (state 1)Negative logic (sink) (DI1...DI8), > 16 V (state 0),
Analogue output number:	2
Analogue output type:	Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bitsSoftware-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bitsSoftware-configurable current DQ-, DQ+: 30 V DCSoftware-configurable current DQ-, DQ+: 100 mA
Sampling duration:	2 ms +/- 0.5 ms (DI1...DI4) - discrete input5 ms +/- 1 ms (DI5, DI6) - discrete input5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input10 ms +/- 1 ms (AO1) - analog output
Accuracy:	+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Linearity error:	AI1, AI2, AI3: +/- 0.15 % of maximum value for analog inputAO1, AO2: +/- 0.2 % for analog output
Relay output number:	3
Relay output type:	Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cyclesConfigurable relay logic R2: sequence relay NO electrical durability 100000 cyclesConfigurable relay logic R3: sequence relay NO electrical durability 100000 cycles
Refresh time:	Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
Minimum switching current:	Relay output R1, R2, R3: 5 mA at 24 V DC
Maximum switching current:	Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V ACRelay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DCRelay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V ACRelay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Isolation:	Between power and control terminals
Maximum output frequency:	500 kHz
Maximum associated fuse rating:	4.0 A
Maximum input current:	1.5 A
Specific application:	Utility
IP degree of protection:	IP21
Discrete and process manufacturing:	Compressor centrifugal Building - HVACOther application Food and beverage processingFan Mining mineral and metalPump Mining mineral and metalFan Oil and gasOther application Water and waste waterScrew compressor Building - HVACPump Food and beverage processingFan Food and beverage processingAtomization Food and beverage processingElectro submersible pump (ESP) Oil and gasWater injection pump Oil and gasJet fuel pump Oil and gasCompressor for refinery Oil and gasCentrifuge pump Water and waste waterPositive displacement pump Water and waste waterElectro submersible pump (ESP) Water and waste waterScrew pump Water and waste waterLobe compressor Water and waste waterScrew compressor Water and waste waterCompressor centrifugal Water and waste waterFan Water and waste waterConveyor Water and waste waterMixer Water and waste water
Power range:	0.55...1 kW at 380...440 V 3 phases0.55...1 kW at 480...500 V 3 phases
Motor starter type:	Variable speed drive
Housing material:	Plastic
Quantity per set:	1
Enclosure mounting:	Wall mounted

Insulation resistance:	> 1 MOhm 500 V DC for 1 minute to earth
Noise level:	54.5 dB conforming to 86/188/EEC
Power dissipation in W:	Natural convection: 26 W at 380 V, switching frequency 4 kHzForced convection: 21 W at 380 V, switching frequency 4 kHz
Volume of cooling air:	38 m3/h
Operating position:	Vertical +/- 10 degree
Maximum THDI:
Electromagnetic compatibility:	Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-41.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Pollution degree:	2 conforming to EN/IEC 61800-5-1
Vibration resistance:	1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-61 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
Shock resistance:	15 gn for 11 ms conforming to IEC 60068-2-27
Relative humidity:	5...95 % without condensation conforming to IEC 60068-2-3
Ambient air temperature for operation:	-15...50 °C (without derating)50...60 °C (with derating factor)
Ambient air temperature for storage:	-40...70 °C
Operating altitude:	1000...4800 m with current derating 1 % per 100 m
Standards:	UL 508C EN/IEC 61800-3Environment 1 category C2 EN/IEC 61800-3Environment 2 category C3 EN/IEC 61800-3 EN/IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
Product certifications:	TÜVATEX zone 2/22CSADNV-GLULATEX INERIS
Marking:	CE
NEMA degree of protection:	NEMA 1
Standards:	UL 508CEN/IEC 61800-3EN/IEC 61800-3 environment 1 category C2EN/IEC 61800-3 environment 2 category C3EN/IEC 61800-5-1IEC 61000-3-12IEC 60721-3IEC 61508IEC 13849-1
Overvoltage category:	III
Regulation loop:	Adjustable PID regulator
Noise level:	54.5 dB
Pollution degree:	2
Ambient air temperature for operation:	-15...60 °C
Sustainable offer status:	Green Premium productREACh Regulation