SCHNEIDER
TeSys D control relay - 3 NO + 2 NC - <= 690 V - 24 V DC low consumption coil - CAD32BL
CAD32BL
€43.08 Excl. Tax
€51.70 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
In stock more than 25 units – Dispatched within 24/48h
- Technical support and dedicated single point of contact
- Free delivery from 200€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range: | TeSysTeSys Deca |
|---|---|
| Range of product: | TeSys D control relay |
| Product name: | TeSys CAD |
| Product or component type: | Control relay |
| Device short name: | CAD |
| Contactor application: | Control circuit |
| Utilisation category: | AC-15DC-13AC-14 |
|---|---|
| Pole contact composition: | 3 NO + 2 NC |
| [Ue] rated operational voltage: | |
| Control circuit type: | DC low consumption |
| [Uc] control circuit voltage: | 24 V DC |
| [Uimp] rated impulse withstand voltage: | 6 kV conforming to IEC 60947 |
| [Ith] conventional free air thermal current: | 10 A (at 60 °C) |
| Irms rated making capacity: | 140 A AC conforming to IEC 60947-5-1250 A DC conforming to IEC 60947-5-1 |
| [Icw] rated short-time withstand current: | 100 A - 1 s120 A - 500 ms140 A - 100 ms |
| Associated fuse rating: | 10 A gG conforming to IEC 60947-5-1 |
| [Ui] rated insulation voltage: | 600 V UL certified600 V CSA certified690 V conforming to IEC 60947-5-1 |
| Mounting support: | PlateRail |
| Connections - terminals: | Screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable endScrew clamp terminals 2 cable(s) 1...4 mm²flexible without cable endScrew clamp terminals 1 cable(s) 1...4 mm²flexible with cable endScrew clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable endScrew clamp terminals 1 cable(s) 1...4 mm²solid without cable endScrew clamp terminals 2 cable(s) 1...4 mm²solid without cable end |
| Tightening torque: | 1.2 N.m - on screw clamp terminals - with screwdriver Philips No 21.2 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm1.2 N.m - on screw clamp terminals - with screwdriver pozidriv No 2 |
| Control circuit voltage limits: | 0.1...0.25 Uc (-40...70 °C):drop-out DC0.7...1.25 Uc (-40...60 °C):operational DC1...1.25 Uc (60...70 °C):operational DC |
| Operating time: | 65...88 ms coil energisation and NO closing14...25 ms coil de-energisation and NO opening57...77 ms coil energisation and NC opening28...42 ms coil de-energisation and NC closing |
| Mechanical durability: | 30 Mcycles |
| Maximum operating rate: | 180 cyc/mn |
| Time constant: | 40 ms |
| Inrush power in W: | 2.4 W (at 20 °C) |
| Hold-in power consumption in W: | 2.4 W at 20 °C |
| Minimum switching voltage: | 17 V |
| Minimum switching current: | 5 mA |
| Non-overlap time: | 1.5 ms on energisation between NC and NO contact1.5 ms on de-energisation between NC and NO contact |
| Insulation resistance: | > 10 MOhm |
| Mechanical robustness: | Shocks control relay open: 10 Gn for 11 ms conforming to IEC 60068-2-27Shocks control relay closed: 15 Gn for 11 ms conforming to IEC 60068-2-27Vibrations control relay open: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6Vibrations control relay closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 |
| Height: | 77 mm |
| Width: | 45 mm |
| Depth: | 93 mm |
| Product weight: | 0.58 kg |
| Compatibility code: | CAD |
In short
Reference CAD32BL
Product Name TeSys D control relay - 3 NO + 2 NC - <= 690 V - 24 V DC low consumption coil - CAD32BL
Range TeSys
Learn more
What is an auxiliary contactor?
This article will help you learn more about auxiliary contactors and understand what they are used for. Find all the electrical equipment you need at One-Elec.com
Related Categories
