SCHNEIDER
soft starter for asynchronous motor - ATS48 - 81 A - 230..415 V - 18.5..75 KW - ATS48D88Q
ATS48D88Q
€982.71 Excl. Tax
€1,179.25 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
In stock – Dispatched within 24/48h
- Technical support and dedicated single point of contact
- Free delivery from 200€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range of product: | Altistart 48 |
|---|---|
| Product or component type: | Soft starter |
| Product destination: | Asynchronous motors |
| Product specific application: | Heavy duty industry and pumps |
| Device short name: | ATS48 |
| [Us] rated supply voltage: | 230...415 V - 15...10 % |
| Motor power kW: | 55 kW at 400 V connection to the motor delta terminals for severe applications75 kW at 400 V connection to the motor delta terminals for standard applications18.5 kW at 230 V connection in the motor supply line for severe applications22 kW at 230 V connection in the motor supply line for standard applications37 kW at 230 V connection to the motor delta terminals for severe applications37 kW at 400 V connection in the motor supply line for severe applications45 kW at 230 V connection to the motor delta terminals for standard applications45 kW at 400 V connection in the motor supply line for standard applications |
| Power dissipation in W: | 245 W for severe applications290 W for standard applications |
| Utilisation category: | AC-53A |
| Type of start: | Start with torque control (current limited to 5 In) |
| IcL starter rating: | 88 A for connection in the motor supply line for severe applications88 A for connection in the motor supply line for standard applications152 A for connection to the motor delta terminals for severe applications152 A for connection to the motor delta terminals for standard applications |
| Assembly style: | With heat sink |
|---|---|
| Function available: | External bypass (optional) |
| Supply frequency: | 50...60 Hz - 5...5 % |
| Network frequency: | 47.5...63 Hz |
| Device connection: | To the motor delta terminalsIn the motor supply line |
| Discrete output number: | 2 |
| Discrete output type: | (LO1) logic output 0 V common configurable (LO2) logic output 0 V common configurable (R1) relay outputs fault relay NO (R2) relay outputs end of starting relay NO (R3) relay outputs motor powered NO |
| Output absolute accuracy precision: | +/- 5 % |
| Minimum switching current: | 10 mA at 6 V DC for relay outputs |
| Maximum switching current: | Logic output 0.2 A at 30 V DCRelay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5 20 msRelay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5 20 ms |
| Discrete input number: | 5 |
| Discrete input type: | PTC, 750 Ohm at 25 °C (Stop, Run, LI3, LI4) logic, |
| Discrete input voltage: | 24 V |
| Discrete input logic: | Positive logic Stop, Run, LI3, LI4 at State 0: 11 V, >= 5 mA |
| Supply inrush current: | 0.4...1.3 Icl adjustable |
| Analogue output type: | Current output AO: 0-20 mA or 4-20 mA, impedance |
| Communication port protocol: | Modbus |
| Connector type: | 1 RJ45 |
| Communication data link: | Serial |
| Physical interface: | RS485 multidrop |
| Transmission rate: | 4800, 9600 or 19200 bps |
| Installed device: | 31 |
| Protection type: | Phase failure: lineThermal protection: motorThermal protection: starter |
| Marking: | CE |
| Operating position: | Vertical +/- 10 degree |
| Height: | 290 mm |
| Width: | 190 mm |
| Depth: | 235 mm |
| Product weight: | 8.3 kg |
| Power range: | 15...25 kW at 200...240 V 3 phases30...50 kW at 200...240 V 3 phases30...50 kW at 380...440 V 3 phases55...100 kW at 380...440 V 3 phases |
| Motor starter type: | Soft starter |
In short
Reference ATS48D88Q
Product Name soft starter for asynchronous motor - ATS48 - 81 A - 230..415 V - 18.5..75 KW - ATS48D88Q
Related Categories
