Fast delivery - Satisfied or refunded for 14 days
9,3/10 out of 1126 reviews
100 products at 10% off until 18 November! Find out more
SCHNEIDER

TeSys F contactor - 4P (4 NO) - AC-1 - <= 440 V 250 A - coil 230 V AC - LC1F1504P7

LC1F1504P7

Technical informations
Range of product: TeSys F
Range: TeSys
Product name: TeSys F
Product or component type: Contactor
Device short name: LC1F
Contactor application: Resistive load
Utilisation category: AC-1
Poles description: 4P
Pole contact composition: 4 NO
[Ue] rated operational voltage:
[Ie] rated operational current: 250 A (at
Control circuit type: AC at 40...400 Hz
[Uc] control circuit voltage: 230 V AC 40...400 Hz
[Uimp] rated impulse withstand voltage: 8 kV
Overvoltage category: III
[Ith] conventional free air thermal current: 250 A (at 40 °C)
Rated breaking capacity: 1200 A conforming to IEC 60947-4-1
[Icw] rated short-time withstand current: 1200 A 40 °C - 10 s700 A 40 °C - 30 s600 A 40 °C - 1 min450 A 40 °C - 3 min350 A 40 °C - 10 min
Associated fuse rating: 160 A aM at 250 A gG at
Average impedance: 0.35 mOhm - Ith 250 A 50 Hz
[Ui] rated insulation voltage: 1000 V conforming to IEC 60947-4-11500 V conforming to VDE 0110 group C
Power dissipation per pole: 22 W AC-1
Mounting support: Plate
Standards: IEC 60947-4-1IEC 60947-1EN 60947-1EN 60947-4-1JIS C8201-4-1
Product certifications: LROS (Lloyds register of shipping)RMRoSCCCDNVCBRINAULABSBVUKCA
Connections - terminals: Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable endControl circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable endControl circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable endControl circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable endControl circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable endControl circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable endPower circuit: bar 2 cable(s) - busbar cross section: 25 x 3 mmPower circuit: lugs-ring terminals 1 cable(s) 120 mm²Power circuit: connector 1 cable(s) 120 mm²Power circuit: bolted connection
Tightening torque: Control circuit: 1.2 N.mPower circuit: 18 N.m
Control circuit voltage limits: Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C)Drop-out: 0.35...0.55 Uc 40...400 Hz (at 55 °C)
Inrush power in VA: 770 VA 40...400 Hz cos phi 0.9 (at 20 °C)
Hold-in power consumption in VA: 8.1 VA 40...400 Hz cos phi 0.9 (at 20 °C)
Heat dissipation: 5.9...7.2 W
Operating time: 35 ms closing (at Uc) 130 ms opening (at Uc)
Mechanical durability: 10 Mcycles
Maximum operating rate: 2400 cyc/h 55 °C
Compatibility code: LC1F
In short
Reference LC1F1504P7
Product Name TeSys F contactor - 4P (4 NO) - AC-1 - <= 440 V 250 A - coil 230 V AC - LC1F1504P7
Range TeSys
Related Categories