SCHNEIDER
TeSys F contactor - 3P (3 NO) - AC-3 - <= 440 V 330 A - coil 24 V DC - LC1F330BD
LC1F330BD
Obsolete product, here is the proposed substitution for the reference LC1F330BD : LC1G330BEEA
Technical informations
| Range of product: | TeSys F |
|---|---|
| Range: | TeSys |
| Product name: | TeSys F |
| Product or component type: | Contactor |
| Device short name: | LC1F |
| Contactor application: | Resistive loadMotor control |
| Utilisation category: | AC-3AC-1AC-4 |
| Poles description: | 3P |
| Pole contact composition: | 3 NO |
| [Ue] rated operational voltage: | |
| [Ie] rated operational current: | 400 A (at 330 A (at |
| Motor power kW: | 160 kW at 380...400 V AC 50/60 Hz (AC-3)180 kW at 415 V AC 50/60 Hz (AC-3)200 kW at 440 V AC 50/60 Hz (AC-3)200 kW at 500 V AC 50/60 Hz (AC-3)220 kW at 660...690 V AC 50/60 Hz (AC-3)160 kW at 1000 V AC 50/60 Hz (AC-3)100 kW at 220...230 V AC 50/60 Hz (AC-3)59 kW at 400 V AC 50/60 Hz (AC-4) |
| Control circuit type: | DC standard |
| [Uc] control circuit voltage: | 24 V DC |
| Coil type: | Standard |
| [Uimp] rated impulse withstand voltage: | 8 kV |
|---|---|
| Overvoltage category: | III |
| [Ith] conventional free air thermal current: | 400 A (at 40 °C) |
| Rated breaking capacity: | 2640 A conforming to IEC 60947-4-1 |
| [Icw] rated short-time withstand current: | 2650 A 40 °C - 10 s1800 A 40 °C - 30 s1300 A 40 °C - 1 min900 A 40 °C - 3 min750 A 40 °C - 10 min |
| Associated fuse rating: | 400 A aM at 500 A gG at |
| Average impedance: | 0.28 mOhm - Ith 400 A 50 Hz |
| [Ui] rated insulation voltage: | 1000 V conforming to IEC 60947-4-11500 V conforming to VDE 0110 group C |
| Power dissipation per pole: | 44 W AC-131 W AC-3 |
| Mounting support: | Plate |
| Standards: | IEC 60947-1EN 60947-4-1IEC 60947-4-1EN 60947-1JIS C8201-4-1 |
| Product certifications: | RINAULDNVLROS (Lloyds register of shipping)ABSCSACBRMRoSBVUKCA |
| Connections - terminals: | Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable endControl circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable endControl circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable endControl circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable endControl circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable endControl circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable endPower circuit: lugs-ring terminals 1 cable(s) 240 mm²Power circuit: bar 2 cable(s) - busbar cross section: 30 x 5 mmPower circuit: bolted connection |
| Tightening torque: | Control circuit: 1.2 N.mPower circuit: 35 N.m |
| Control circuit voltage limits: | Operational: 0.85...1.1 Uc (at 55 °C)Drop-out: 0.15...0.2 Uc (at 55 °C) |
| Inrush power in W: | 750 W (at 20 °C) |
| Hold-in power consumption in W: | 5 W at 20 °C |
| Heat dissipation: | 5 W |
| Operating time: | 40...50 ms closing40...65 ms opening |
| Mechanical durability: | 10 Mcycles |
| Maximum operating rate: | 2400 cyc/h 55 °C |
| Compatibility code: | LC1F |
| Power range: | 55...100 kW at 200...240 V 3 phases110...220 kW at 480...500 V 3 phases110...220 kW at 380...440 V 3 phases |
| Motor starter type: | Direct on-line contactor |
| Contactor coil voltage: | 24 V DC standard |
In short
Reference LC1F330BD
Product Name TeSys F contactor - 3P (3 NO) - AC-3 - <= 440 V 330 A - coil 24 V DC - LC1F330BD
Range TeSys
Related Categories