SCHNEIDER
TeSys F contactor - 3P (3 NO) - AC-3 - <= 440 V 630 A - coil 230 V AC - LC1F630P7
LC1F630P7
Obsolete product, here is the proposed substitution for the reference LC1F630P7 : LC1G630KUEN
Technical informations
| Range of product: | TeSys F |
|---|---|
| Range: | TeSys |
| Product name: | TeSys F |
| Product or component type: | Contactor |
| Device short name: | LC1F |
| Contactor application: | Resistive loadMotor control |
| Utilisation category: | AC-1AC-3AC-4 |
| Poles description: | 3P |
| Pole contact composition: | 3 NO |
| [Ue] rated operational voltage: | |
| [Ie] rated operational current: | 1000 A (at 630 A (at |
| Motor power kW: | 335 kW at 380...400 V AC 50/60 Hz (AC-3)375 kW at 415 V AC 50/60 Hz (AC-3)400 kW at 440 V AC 50/60 Hz (AC-3)400 kW at 500 V AC 50/60 Hz (AC-3)450 kW at 660...690 V AC 50/60 Hz (AC-3)450 kW at 1000 V AC 50/60 Hz (AC-3)200 kW at 220...230 V AC 50/60 Hz (AC-3)100 kW at 400 V AC 50/60 Hz (AC-4) |
| Control circuit type: | AC at 40...400 Hz |
| [Uc] control circuit voltage: | 230 V AC 40...400 Hz |
| [Uimp] rated impulse withstand voltage: | 8 kV |
|---|---|
| Overvoltage category: | III |
| [Ith] conventional free air thermal current: | 1000 A (at 40 °C) |
| Rated breaking capacity: | 5040 A conforming to IEC 60947-4-1 |
| [Icw] rated short-time withstand current: | 5050 A 40 °C - 10 s4400 A 40 °C - 30 s3400 A 40 °C - 1 min2200 A 40 °C - 3 min1600 A 40 °C - 10 min |
| Associated fuse rating: | 1000 A gG at 630 A aM at |
| Average impedance: | 0.12 mOhm - Ith 1000 A 50 Hz |
| [Ui] rated insulation voltage: | 1000 V conforming to IEC 60947-4-11500 V conforming to VDE 0110 group C |
| Power dissipation per pole: | 120 W AC-148 W AC-3 |
| Mounting support: | Plate |
| Standards: | EN 60947-4-1IEC 60947-4-1JIS C8201-4-1IEC 60947-1EN 60947-1 |
| Product certifications: | CBRINABVRMRoSULCSADNVABSLROS (Lloyds register of shipping)UKCA |
| Connections - terminals: | Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable endControl circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable endControl circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable endControl circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable endControl circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable endControl circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable endPower circuit: bar 2 cable(s) - busbar cross section: 60 x 5 mmPower circuit: bolted connection |
| Tightening torque: | Control circuit: 1.2 N.mPower circuit: 58 N.m |
| Control circuit voltage limits: | Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C)Drop-out: 0.25...0.5 Uc 40...400 Hz (at 55 °C) |
| Inrush power in VA: | 1650 VA 40...400 Hz cos phi 0.9 (at 20 °C) |
| Hold-in power consumption in VA: | 22 VA 40...400 Hz cos phi 0.9 (at 20 °C) |
| Heat dissipation: | 20 W |
| Operating time: | 40...80 ms closing100...200 ms opening |
| Mechanical durability: | 5 Mcycles |
| Maximum operating rate: | 1200 cyc/h 55 °C |
| Compatibility code: | LC1F |
| Power range: | 250...500 kW at 380...440 V 3 phases110...220 kW at 200...240 V 3 phases250...500 kW at 480...500 V 3 phases |
| Motor starter type: | Direct on-line contactor |
| Contactor coil voltage: | 230 V AC standard |
In short
Reference LC1F630P7
Product Name TeSys F contactor - 3P (3 NO) - AC-3 - <= 440 V 630 A - coil 230 V AC - LC1F630P7
Range TeSys
Related Categories