SCHNEIDER
High power contactor, TeSys Giga, 3 pole (3NO), AC-3 <=440V 265A, standard version, 100…250V wide band AC/DC coil - LC1G265KUEN
LC1G265KUEN
€710.14 Excl. Tax
€852.17 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
In stock more than 25 units – Dispatched within 24/48h
- Technical support and dedicated single point of contact
- Free delivery from 200€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range: | TeSys |
|---|---|
| Range of product: | TeSys Giga |
| Product or component type: | Contactor |
| Device short name: | LC1G |
| Contactor application: | Power switchingMotor control |
| Utilisation category: | AC-1AC-3AC-3eAC-4AC-5aAC-5bAC-6aAC-6bAC-8aAC-8bDC-1DC-3DC-5 |
| Poles description: | 3P |
| [Ue] rated operational voltage: | |
| [Ie] rated operational current: | 385 A (at 265 A (at |
| [Uc] control circuit voltage: | 100...250 V AC/DC 50/60 Hz |
| Number of modules per PLC per PC: | 0 |
| Colour: | Dark grey |
| [Uimp] rated impulse withstand voltage: | 8 kV |
|---|---|
| Overvoltage category: | III |
| [Ith] conventional free air thermal current: | 385 A (at 40 °C) |
| Rated breaking capacity: | 2380 A at 440 V |
| [Icw] rated short-time withstand current: | 2.2 kA - 10 s1.23 kA - 30 s0.95 kA - 1 min0.62 kA - 3 min0.48 kA - 10 min |
| Associated fuse rating: | 315 A aM at 250 A aM at 400 A gG at |
| Average impedance: | 0.000144 Ohm |
| [Ui] rated insulation voltage: | 1000 V |
| Power dissipation per pole: | 20 W AC-1 - Ith 385 A11 W AC-3 - Ith 265 A |
| Compatibility code: | LC1G |
| Pole contact composition: | 3 NO |
| Auxiliary contact composition: | 1 NO + 1 NC |
| Network frequency: | 50/60 Hz16.67...400 Hz |
| Motor power kW: | 75 kW at 230 V AC 50/60 Hz (AC-3e)132 kW at 400 V AC 50/60 Hz (AC-3e)132 kW at 415 V AC 50/60 Hz (AC-3e)160 kW at 440 V AC 50/60 Hz (AC-3e)160 kW at 500 V AC 50/60 Hz (AC-3e)200 kW at 690 V AC 50/60 Hz (AC-3e)160 kW at 1000 V AC 50/60 Hz (AC-3e)75 kW at 230 V AC 50/60 Hz (AC-3)132 kW at 400 V AC 50/60 Hz (AC-3)132 kW at 415 V AC 50/60 Hz (AC-3)160 kW at 440 V AC 50/60 Hz (AC-3)160 kW at 500 V AC 50/60 Hz (AC-3)200 kW at 690 V AC 50/60 Hz (AC-3)160 kW at 1000 V AC 50/60 Hz (AC-3)75 kW at 230 V AC 50/60 Hz (AC-4)132 kW at 400 V AC 50/60 Hz (AC-4)132 kW at 415 V AC 50/60 Hz (AC-4)150 kW at 440 V AC 50/60 Hz (AC-4)160 kW at 500 V AC 50/60 Hz (AC-4)160 kW at 690 V AC 50/60 Hz (AC-4)160 kW at 1000 V AC 50/60 Hz (AC-4) |
| Motor power hp: | 75 hp at 200/208 V 60 Hz100 hp at 230/240 V 60 Hz200 hp at 460/480 V 60 Hz200 hp at 575/600 V 60 Hz |
| Irms rated making capacity: | 3320 A at 440 V |
| Control circuit voltage limits: | Operational: 0.8...1.1 Uc AC/DC (at 60 °C)Drop-out: 0.1...0.45 Uc AC/DC (at 60 °C) |
| Coil technology: | Built-in bidirectional peak limiting |
| Electrical durability: | 300 cycles AC-1 at Ue 400 V500 cycles AC-3 at Ue 400 V500 cycles AC-3e at Ue 400 V150 cycles AC-4 at Ue 400 V |
| Mechanical durability: | 5 Mcycles8 Mcycles with sub-assembly substitution |
| Inrush power in VA: | 700 VA |
| Inrush power in W: | 645 W |
| Hold-in power consumption in VA: | 15.0 VA |
| Hold-in power consumption in W: | 9.1 W |
| Operating time: | 40...70 ms closing15...50 ms opening |
| Maximum operating rate: | 300 cyc/h AC-1500 cyc/h AC-3500 cyc/h AC-3e150 cyc/h AC-4 AC-4 |
| Connections - terminals: | Power circuit: bar 2 - busbar cross section: 32 x 10 mmPower circuit: lugs-ring terminals 1 185 mm²Power circuit: bolted connectionControl circuit: push-in 1 0.2...2.5 mm² - cable stiffness: solid stranded without cable endControl circuit: push-in 1 0.25...2.5 mm² - cable stiffness: flexible with cable endControl circuit: push-in 2 0.5...1.0 mm² with cable endControl circuit: push-in 0.75...2.5 mm² - cable stiffness: solid stranded without cable endControl circuit: push-in 0.75...2.5 mm² - cable stiffness: flexible with cable end |
| Connection pitch: | 45 mm |
| Mounting support: | Plate |
| Standards: | EN/IEC 60947-4-1EN/IEC 60947-5-1UL 60947-4-1CSA C22.2 No 60947-4-1JIS C8201-4-1JIS C8201-5-1 |
| Product certifications: | CB SchemeCCCcULusEACCEUKCAEU-RO-MR by DNV-GL |
| Tightening torque: | 35 N.m |
| Height: | 225 mm |
| Width: | 140 mm |
| Depth: | 226 mm |
| Net weight: | 7.5 kg |
In short
Reference LC1G265KUEN
Product Name High power contactor, TeSys Giga, 3 pole (3NO), AC-3 <=440V 265A, standard version, 100…250V wide band AC/DC coil - LC1G265KUEN
Range TeSys
Related Categories
