201M-C10 Miniature Circuit Breaker 10 - 1P - C - 10 A - ABB2CDS271001R0104

Technical :

• Standards:
• IEC/EN 60898-1 : CSA 22.2 No. 235
• IEC/EN 60947-2 : UL 1077
• Tripping Characteristic: : C
• Rated Operational Voltage: : acc. to IEC 60898-1 230 / 400 V AC
• acc. to IEC 60898-1 230 V : acc. to IEC 60947-2 230 V AC
• Operational Voltage: : Maximum (Incl. Tolerance) 253 V AC
• Maximum (Incl. Tolerance) 72 V DC : Minimum 12 V AC
• Minimum 12 V DC : Rated Insulation Voltage (Ui):
• acc. to IEC/EN 60664-1 440 V : Rated Impulse Withstand Voltage (Uimp):
• 4 kV : at 2000 m 5 kV
• at Sea Level 6.2 kV : Dielectric Test Voltage:
• 50/60 Hz, 1 min: 2 kV : Input Voltage Type:
• AC/DC : Rated Current (In):
• 10 A : Rated Short-Circuit Capacity:
• (AC) 10 kA : (230 / 400 V AC) 10 kA
• (230 V) 10 kA : (400 V) 10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu): : (133 V AC) 25 kA
• (230 V AC) 15 kA : (230 V) 15 kA
• (400 V) 15 kA : Rated Conditional Short-Circuit Current (Inc):
• (230 V) 15 kA : Rated Service Short-Circuit Breaking Capacity (Ics):
• (133 V AC) 18.8 kA : (230 V AC) 7.5 kA
• Frequency (f): : 50 Hz
• Rated Frequency (f): : 50 / 60 Hz
• Power Loss: : 2.1 W
• at Rated Operating Conditions per Pole 2.1 W : Power Supply Connection:
• Arbitrary : Contact Position Indication:
• Red ON / Green OFF : Energy Limiting Class:
• 3 : Electrical Endurance:
• 20000 AC cycle : Mechanical Endurance:
• 20000 cycle : Number of Protected Poles:
• 1 : Number of Poles:
• 1 : Overvoltage Category:
• III : Tightening Torque:
• 2.8 N·m : Screw Terminal Type:
• Failsafe Bi-directional Cylinder-lift Terminal : Actuator Marking:
• I / O : Actuator Material:
• Insulation Group II, Black, Sealable : Housing Material:
• Insulation Group II, RAL 7035 : Mounting on DIN Rail:
• TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715 : TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting Position: : any
• Recommended Screw Driver: : Pozidriv 2
• Accessories Available: : Yes
• Connecting Capacity: : Busbar 10 / 10 mm²
• Flexible with Ferrule 0.75 ... 25 mm² : Flexible 0.75 ... 25 mm²
• Flexible 0.75 ... 25 mm² : Rigid 0.75 ... 35 mm²
• Rigid 0.75 ... 35 mm² : Stranded 0.75 ... 35 mm²
• Installation Size: : acc. to DIN 43880 1
• Terminal Type: : Screw Terminals

Technical UL/CSA :

• Maximum Operating Voltage UL/CSA:
• 60 V DC : 480Y/277 V AC
• Interrupting Rating acc. to UL1077: : (277 V AC) 6 kA
• (480Y / 277 V AC) 6 kA : (60 V DC) 10 kA
• Connecting Capacity UL/CSA: : Busbar 14-8 AWG
• Conductor 14-4 AWG : Tightening Torque UL/CSA:
• 18 in·lb