SCHNEIDER
ClimaSys forced vent. IP54, 300m3/h, 24V DC, with outlet grille and filter G2 - NSYCVF300M24DPF
NSYCVF300M24DPF
€212.69 Excl. Tax
€255.23 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
In stock – Dispatched within 24/48h
- Technical support and dedicated single point of contact
- Free delivery from 200€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range: | ClimaSys |
|---|---|
| Product name: | ClimaSys CV |
| Product or component type: | Fan |
| Type of ventilation filter: | Standard |
| Air flow: | Free flow rate with standard filter: 262 m3/h |
| [Us] rated supply voltage: | 12...30 V |
| Input voltage: | 24 V DC |
| Power range: | 13 W |
|---|---|
| [In] rated current: | 0.53 A |
| Noise level: | 55...56 dB |
| Bearing type: | Ball |
| Height: | 268 mm external: |
| Width: | 248 mm external: |
| Depth: | 103.4 mm external: |
| Cut-out dimensions: | 223 x 223 mm |
| Net weight: | 1.1 kg |
| Material: | Outlet grille: injected thermoplastic (ASA PC) |
| Colour: | Outlet grille: grey (RAL 7035) |
| Ambient air temperature for operation: | -10...70 °C |
| Ambient air temperature for storage: | -40...70 °C |
| Maximum pressure: | 158 Pa flow rate 0 m³/h |
| Connections - terminals: | Cable |
| IP degree of protection: | IP54 |
| Device composition: | 1 axial motor2 protective grille: on the front and rear surfaces1 filter: front of axial motor1 outlet grille: front1 cut-out template1 power cord |
| Condition of use: | Overfrequent filter replacement should be avoidedOutside temperature must be 5 °C lower than inside temperatureFlow rates depends on the work point, see ProClima softwareFilter must be cleaned and replaced regularlySurrounding environment must be relatively clean |
In short
Reference NSYCVF300M24DPF
Product Name ClimaSys forced vent. IP54, 300m3/h, 24V DC, with outlet grille and filter G2 - NSYCVF300M24DPF
Range ClimaSys
Related Categories
