SCHNEIDER
module XPS-CM - single-beam photo-electric sensors - 24 V DC - XPSCM1144P
XPSCM1144P
€372.25 Excl. Tax
€446.70 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
Supply in process – Average delivery time 4/6 weeks
- Technical support and dedicated single point of contact
- Free delivery from 200€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range of product: | Telemecanique Safety light curtains XUSL |
|---|---|
| Product or component type: | Safety module |
| Safety module name: | XPSCM |
| Safety module application: | For monitoring of single beam photo-electric sensor |
| Function of module: | Built-in muting |
| Safety level: | Can reach category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1 |
| Safety reliability data: | MTTFd = 16.6 years conforming to EN/ISO 13849-1DC = 95.5 % conforming to EN/ISO 13849-1PFH = 3.12E-7 1/h conforming to EN/IEC 61508PFHd = 3.12E-7 1/h conforming to EN/IEC 62061 |
| Number of inputs: | 2 (terminal(s) MA, MB) for muting function4 (terminal(s) Z1, Z2, Z3, Z4) for sensor |
| Input voltage: | 24 V DC for sensor24 V DC (terminal(s) U+, U-) for muting function |
| Input compatibility: | XC limit switch for muting functionXU2M18PP340... for muting functionXU2S18PP340... (infrared) for sensorXU9M18PP340... for muting function |
| Connections - terminals: | Captive screw clamp terminals, removable terminal block, 1 x 0.2...1 x 2.5 mm² solid or flexible without cable endCaptive screw clamp terminals, removable terminal block, 1 x 0.25...1 x 2.5 mm² flexible with cable end, with bezelCaptive screw clamp terminals, removable terminal block, 1 x 0.25...1 x 2.5 mm² flexible with cable end, without bezelCaptive screw clamp terminals, removable terminal block, 2 x 0.2...2 x 1 mm² solid without cable endCaptive screw clamp terminals, removable terminal block, 2 x 0.2...2 x 1.5 mm² flexible without cable endCaptive screw clamp terminals, removable terminal block, 2 x 0.25...2 x 1 mm² flexible with cable end, without bezelCaptive screw clamp terminals, removable terminal block, 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel |
| Output type: | Relay 2 NO (13-14, 23-24), volt-free |
| Number of additional circuits: | 0 |
| [Us] rated supply voltage: | 24 V DC - 20...20 % |
| Sensor power supply: | U+, U-: 24 V DC |
|---|---|
| Maximum supply current for sensors: | 200 mA |
| Input current: | 200 mA for muting function |
| Synchronisation time between inputs: | 3 s (+/- 20 %) for the activation of the MA/MB muting signal |
| Muting maximum duration: | 60 s (- 10...30 %) |
| Maximum line resistance: | 10 Ohm for sensor power supply |
| Breaking capacity: | 180 VA holding AC-15 C300 relay output1800 VA inrush AC-15 C300 relay output |
| Breaking capacity: | 20 mA at 24 V for solid state output1.5 A at 24 V (DC-13) time constant: 50 ms for relay output |
| Associated fuse rating: | 4 A gG for relay output conforming to DIN VDE 0660 part 2004 A gG for relay output conforming to EN/IEC 60947-5-16 A fast blow for relay output conforming to DIN VDE 0660 part 2006 A fast blow for relay output conforming to EN/IEC 60947-5-1 |
| Minimum output current: | 10 mA for relay output |
| Minimum output voltage: | 17 V for relay output |
| Maximum response time on input open: | 25 ms |
| Local signalling: | 1 LED, function electronic internal fuse status1 LED, function restarting1 LED, function safety outputs closed1 LED, function safety outputs open1 incandescent lamp, function muting power consumption: 4...6.5 W |
| Output thermal current: | 5.6 A per relay11 A maximum |
| Power consumption in W: | 15 W |
| Protection type: | Electronic internal fuse |
| [Ui] rated insulation voltage: | 300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2300 V (pollution degree 2) conforming to EN/IEC 60947-5-1 |
| [Uimp] rated impulse withstand voltage: | 4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 24 kV overvoltage category III conforming to EN/IEC 60947-5-1 |
In short
Reference XPSCM1144P
Product Name module XPS-CM - single-beam photo-electric sensors - 24 V DC - XPSCM1144P
Related Categories
