SCHNEIDER
Modular timing relay, 8 A, 1 CO, 1 s..100 h, asymmetrical flashing, 24...240 V AC - RE17RLMU
RE17RLMU
€50.29 Excl. Tax
€60.35 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
In stock more than 25 units – Dispatched within 24/48h
- Technical support and dedicated single point of contact
- Free delivery from 200€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range of product: | Harmony Timer Relays |
|---|---|
| Product or component type: | Dual function relay |
| Discrete output type: | Relay |
| Width: | 17.5 mm |
| Device short name: | RE17R |
| Time delay type: | Asymmetrical flashing |
| Time delay range: | 1...10 h1...10 s0.1...1 s6...60 min1...10 min10...100 h6...60 s |
| Nominal output current: | 8 A |
| [Uc] control circuit voltage: | 24 V24...240 V |
| Connections - terminals: | Screw connectors |
| [In] rated current: | 5 A |
| Output type: | Relay |
| Contacts type and composition: | 1 C/O |
|---|---|
| Contacts material: | Cadmium free |
| Height: | 90 mm |
| Depth: | 72 mm |
| Control type: | Selector switch front panel |
| [Us] rated supply voltage: | 24...240 V AC 50/60 Hz24 V DC |
| Voltage range: | 0.85...1.1 Us |
| Supply frequency: | 50...60 Hz +/- 5 % |
| Input voltage: | 10 V |
| Connections - terminals: | Screw terminals, 1 x 0.5...1 x 3.3 mm² (AWG 20...AWG 12) solid without cable endScrew terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable endScrew terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 14) flexible with cable endScrew terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end |
| Tightening torque: | 0.6...1 N.m conforming to IEC 60947-1 |
| Housing material: | Self-extinguishing |
| Repeat accuracy: | +/- 0.5 % conforming to IEC 61812-1 |
| Temperature drift: | +/- 0.05 %/°C |
| Voltage drift: | +/- 0.2 %/V |
| Setting accuracy of time delay: | +/- 10 % of full scale at 25 °C conforming to IEC 61812-1 |
| Impulse duration: | 100 ms with load in parallel typical30 ms typical |
| Insulation resistance: | 100 MOhm at 500 V DC conforming to IEC 60664-1 |
| Reset time: | 120 ms on de-energisation typical |
| On-load factor: | 100 % |
| Power consumption in VA: | 0...32 VA at 240 V AC |
| Maximum power consumption in W: | 0.6 W at 24 V DC |
| Minimum switching current: | 10 mA at 5 V DC |
| Maximum switching current: | 8 A AC/DC |
| Maximum switching voltage: | 250 V AC |
| Breaking capacity: | 2000 VA |
| Operating rate in Hz: | 10 Hz |
| Electrical durability: | 100000 cycles (8 A at 250 V AC maximum) for resistive load |
| Mechanical durability: | 10000000 cycles |
| Dielectric strength: | 2.5 kV 1 mA/1 minute 50 Hz conforming to IEC 61812-1 |
| [Uimp] rated impulse withstand voltage: | 5 kV during 1.2/50 µs |
| Maximum delay response: | 100 ms |
| Marking: | CE |
| Creepage distance: | 4 kV/3 conforming to IEC 60664-1 |
| Safety reliability data: | MTTFd = 296.8 yearsB10d = 270000 |
| Mounting position: | Any position in relation to normal vertical mounting plane |
| Mounting support: | 35 mm DIN rail conforming to EN/IEC 60715 |
| Local signalling: | LED indicator for on steady: relay energised, no timing in progressLED indicator for flashing: timing in progress 80 % ON and 20 % OFF |
| Product weight: | 0.07 kg |
| Time delay type: | L, Li |
| Functionality: | Asymmetrical flashing timer |
| Compatibility code: | RE17 |
In short
Reference RE17RLMU
Product Name Modular timing relay, 8 A, 1 CO, 1 s..100 h, asymmetrical flashing, 24...240 V AC - RE17RLMU
Related Categories
