SCHNEIDER
Modular 1-phase current control relay, 5 A, 2 CO, 0.15…15 A,, 24…240 V AC/DC - RM35JA32MW
RM35JA32MW
€107.34 Excl. Tax
€128.81 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
In stock more than 100 units – Dispatched within 24/48h
- Technical support and dedicated single point of contact
- Free delivery from 200€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range of product: | Harmony Control Relays |
|---|---|
| Product or component type: | Current control relay |
| Relay type: | Current control relay |
| Relay name: | RM35JA |
| Relay monitored parameters: | Overcurrent or undercurrent detection |
| Time delay type: | Adjustable 1...20 s, 0 + 10 % on energisation TiAdjustable 0.3...30 s, 0 + 10 % on crossing the threshold Tt |
| Switching capacity in VA: | 1250 VA |
| Minimum switching current: | 10 mA at 5 V DC |
| Maximum switching current: | 5 A AC/DC |
| Maximum power consumption in VA: | 3.5 VA AC |
| Measurement range: | 0.15...1.5 A E1-M terminals0.5...5 A E2-M terminals1.5...15 A E3-M terminals150 mA...15 A current |
| Utilisation category: | AC-12 conforming to IEC 60947-5-1AC-13 conforming to IEC 60947-5-1AC-14 conforming to IEC 60947-5-1AC-15 conforming to IEC 60947-5-1DC-12 conforming to IEC 60947-5-1DC-13 conforming to IEC 60947-5-1DC-14 conforming to IEC 60947-5-1 |
| Contacts type and composition: | 2 C/O |
| Connections - terminals: | Screw connectors |
| [Uc] control circuit voltage: | 24...240 V |
| [In] rated current: | 5 A |
| Reset time: | 1500 ms time delay |
|---|---|
| Maximum switching voltage: | 250 V AC/DC |
| [Us] rated supply voltage: | 24...240 V AC/DC 50/60 Hz +/- 10 % |
| Supply voltage limits: | 20.4...264 V AC/DC |
| Control circuit voltage limits: | - 15 % + 10 % Un |
| Maximum power consumption in W: | 0.6 W DC |
| Control circuit frequency: | 40...70 Hz +/- 10 % |
| Resistance across terminals: | 0.005 Ohm at E3-M terminals0.015 Ohm at E2-M terminals0.05 Ohm at E1-M terminals |
| Output contacts: | 2 C/O |
| Nominal output current: | 5 A |
| Maximum measuring cycle: | 30 ms measurement cycle as true rms value |
| Hysteresis: | 5...50 % of threshold setting |
| Run-up delay at power-up: | 0.3 s |
| Measurement accuracy: | +/- 10 % of the full scale value |
| Repeat accuracy: | +/- 0.5 % for input and measurement circuit+/- 2 % for time delay |
| Measurement error: | 0.05 %/°C with temperature variation1 by volt over the whole range with voltage variation |
| Polarity: | No DC |
| Threshold setting: | 10...100 % |
| Marking: | CE |
| Overvoltage category: | III conforming to IEC 60664-1 |
| Insulation resistance: | > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1 |
| [Ui] rated insulation voltage: | 250 V conforming to IEC 60664-1 |
| Operating position: | Any position without derating |
| Connections - terminals: | Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable endScrew terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable endScrew terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable endScrew terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end |
| Tightening torque: | 0.6...1 N.m conforming to IEC 60947-1 |
| Housing material: | Self-extinguishing plastic |
| Local signalling: | LED (green) for power ONLED (yellow) for relay ON |
| Mounting support: | 35 mm symmetrical DIN rail conforming to EN/IEC 60715 |
| Electrical durability: | 100000 cycles |
| Mechanical durability: | 30000000 cycles |
| Operating rate: | |
| Safety reliability data: | MTTFd = 296.8 yearsB10d = 270000 |
| Contacts material: | Cadmium free |
| Width: | 35 mm |
| Product weight: | 0.13 kg |
| Functionality: | Overcurrent or undercurrent in window mode |
| Compatibility code: | RM3 |
In short
Reference RM35JA32MW
Product Name Modular 1-phase current control relay, 5 A, 2 CO, 0.15…15 A,, 24…240 V AC/DC - RM35JA32MW
Our customers also bought
Related Categories
