Fast delivery - Satisfied or refunded for 14 days
9,3/10 out of 1126 reviews
SCHNEIDER

motor voltage and temperature control relay - RM35-T - 24..240 V AC/DC - 2 NO - RM35TM50MW

RM35TM50MW

€135.05 Excl. Tax
€162.06 Inc. Tax
available In stock more than 25 units – Dispatched within 24/48h
  • check2 Technical support and dedicated single point of contact
  • check2 Free delivery from 200€ of purchase (Metropolitan France)
  • check2 100% secure payments maestro mastercard paypal visa fintecture alma applepay
Technical informations
Range of product: Harmony Control Relays
Product or component type: 3-phase control relay
Relay type: Motor temperature control relay
Product specific application: For 3-phase supply
Relay name: RM35TM
Relay monitored parameters: Phase sequenceMotor temperature via PTC probePhase failure detection
Time delay type: Fixed 0.3 s
Switching capacity in VA: 1250 VA
Measurement range: 208...480 V voltage AC0...20 Ohm short-circuit detection
Contacts type and composition: 2 NO
Connections - terminals: Screw connectors
[Uc] control circuit voltage: 24...240 V
[In] rated current: 5 A
Reset time: 10000 ms output
Maximum switching voltage: 250 V AC250 V DC
Minimum switching current: 10 mA at 5 V DC
Maximum switching current: 5 A AC5 A DC
Supply voltage limits: 20.4...264 V AC20.4...264 V DC
Power consumption in VA: 0...4 VA at 24...240 V AC
Maximum power consumption in W: 0.5 W DC
Control circuit frequency: 50...60 Hz +/- 10 %
Resistance across terminals: 602 mOhm
Output contacts: 2 NO
Nominal output current: 5 A
Measurement voltage limits: 176...528 V AC
Run-up delay at power-up: 500 ms
Voltage range: 176...528 V
Response time: > 50 ms (input Y1 (contact Y1-T1) and push-button)
[Uc] control circuit voltage:
Short-circuit current: 0.007 A temperature sensing circuit (T1-T2 terminals short circuited)
Maximum resistance: 1500 Ohm for temperature sensor at 20 °C
Tripping threshold: 3100 Ohm +/- 10 % for temperature control circuit
Reset threshold: 1650 Ohm +/- 10 % for temperature control circuit
Marking: CE
Overvoltage category: III conforming to IEC 60664-1
Insulation resistance: > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1
[Ui] rated insulation voltage: 400 V conforming to IEC 60664-1
Supply frequency: 50/60 Hz +/- 10 %
Operating position: Any position without derating
Connections - terminals: Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable endScrew terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable endScrew terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable endScrew terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end
Tightening torque: 0.6...1 N.m conforming to IEC 60947-1
Housing material: Self-extinguishing plastic
Local signalling: LED (green) for power ONLED (yellow) for phase of relay (R2)LED (yellow) for temperature of relay (R1)
Mounting support: 35 mm symmetrical DIN rail conforming to EN/IEC 60715
Electrical durability: 10000 cycles
Mechanical durability: 30000000 cycles
Operating rate:
Utilisation category: AC-12 conforming to IEC 60947-5-1AC-13 conforming to IEC 60947-5-1AC-14 conforming to IEC 60947-5-1AC-15 conforming to IEC 60947-5-1DC-12 conforming to IEC 60947-5-1DC-13 conforming to IEC 60947-5-1
Width: 35 mm
Net weight: 0.13 kg
Compatibility code: RM3
In short
Reference RM35TM50MW
Product Name motor voltage and temperature control relay - RM35-T - 24..240 V AC/DC - 2 NO - RM35TM50MW
Related Categories
Industrial electrical equipment Relays Control Relay