SCHNEIDER
Télémécanique inductive sensor XS7 40x40x15 - PBT - Sn15mm - 12..24VDC - cable 2m - XS7C1A1DBL2
XS7C1A1DBL2
€42.20 Excl. Tax
€50.64 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
Supply in process – Average delivery time 4/6 weeks
- Technical support and dedicated single point of contact
- Free delivery from 200€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
Range of product: | Telemecanique Inductive proximity sensors XS |
---|---|
Series name: | General purpose |
Sensor type: | Inductive proximity sensor |
Device application: | - |
Sensor name: | XS7 |
Sensor design: | Flat form 40 x 40 x 15 |
Size: | 15 mm |
Body type: | Fixed |
Detector flush mounting acceptance: | Flush mountable |
Material: | Plastic |
Enclosure material: | PBT |
Type of output signal: | Discrete |
Wiring technique: | 2-wire |
Discrete output function: | 1 NC |
Output circuit type: | DC |
Electrical connection: | cable |
Cable length: | 2 m |
[Us] rated supply voltage: | 12...24 V DC with reverse polarity protection |
Switching capacity in mA: | 1.5...100 mA DC with overload and short-circuit protection |
IP degree of protection: | IP68 double insulation conforming to IEC 60529 |
Detection face: | Frontal |
---|---|
Front material: | PBT |
Sensing range: | > 8...15 mm |
Operating zone: | 0...12 mm |
Differential travel: | 1...15% of Sr |
Cable composition: | 2 x 0.34 mm² |
Wire insulation material: | PvR |
Status LED: | Output state: 1 LED (yellow) |
Supply voltage limits: | 10...36 V DC |
Maximum residual current: | 0.5 mA open state |
Switching frequency: | |
Maximum voltage drop: | |
Maximum delay first up: | 5 ms |
Maximum delay response: | 0.3 ms |
Maximum delay recovery: | 0.7 ms |
Marking: | CE |
Depth: | 15 mm |
Height: | 40 mm |
Width: | 40 mm |
Product weight: | 0.09 kg |
In short
Reference XS7C1A1DBL2
Product Name Télémécanique inductive sensor XS7 40x40x15 - PBT - Sn15mm - 12..24VDC - cable 2m - XS7C1A1DBL2
Device function -
Related Categories