SCHNEIDER
controller M221 40 IO relay - TM221C40R
TM221C40R
€472.33 Excl. Tax
€566.80 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
In stock – Dispatched within 24/48h
- Technical support and dedicated single point of contact
- Free delivery from 200€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range of product: | Modicon M221 |
|---|---|
| Product or component type: | Logic controller |
| [Us] rated supply voltage: | 100...240 V AC |
| Discrete input number: | 24, discrete input conforming to IEC 61131-2 Type 1 |
| Analogue input number: | 2 at 0...10 V |
| Discrete output type: | Relay normally open |
| Discrete output number: | 16 relay |
| Discrete output voltage: | 5...125 V DC5...250 V AC |
| Discrete output current: | 2 A |
| Discrete I/O number: | 40 |
|---|---|
| Maximum number of I/O expansion module: | 7 for relay output |
| Supply voltage limits: | 85...264 V |
| Network frequency: | 50/60 Hz |
| Inrush current: | 40 A |
| Maximum power consumption in VA: | 67 VA at 100...240 V with max number of I/O expansion module37 VA at 100...240 V without I/O expansion module |
| Power supply output current: | 0.52 A 5 V for expansion bus0.24 A 24 V for expansion bus |
| Discrete input logic: | Sink or source (positive/negative) |
| Discrete input voltage: | 24 V |
| Discrete input voltage type: | DC |
| Analogue input resolution: | 10 bits |
| LSB value: | 10 mV |
| Conversion time: | 1 ms per channel + 1 controller cycle time for analogue input analog input |
| Permitted overload on inputs: | +/- 30 V DC for 5 min (maximum) for analog input+/- 13 V DC (permanent) for analog input |
| Voltage state 1 guaranteed: | >= 15 V for input |
| Voltage state 0 guaranteed: | |
| Discrete input current: | 7 mA for discrete input5 mA for fast input |
| Input impedance: | 3.4 kOhm for discrete input100 kOhm for analog input4.9 kOhm for fast input |
| Response time: | 35 µs turn-off, I2...I5 terminal(s) for input10 ms turn-on for output10 ms turn-off for output5 µs turn-on, I0, I1, I6, I7 terminal(s) for fast input35 µs turn-on, other terminals terminal(s) for input5 µs turn-off, I0, I1, I6, I7 terminal(s) for fast input100 µs turn-off, other terminals terminal(s) for input |
| Configurable filtering time: | 0 ms for input3 ms for input12 ms for input |
| Output voltage limits: | 125 V DC277 V AC |
| Maximum current per output common: | 7 A |
| Absolute accuracy error: | +/- 1 % of full scale for analog input |
| Electrical durability: | 100000 cycles AC-12, 120 V, 240 VA, resistive100000 cycles AC-12, 240 V, 480 VA, resistive300000 cycles AC-12, 120 V, 80 VA, resistive300000 cycles AC-12, 240 V, 160 VA, resistive100000 cycles AC-15, cos phi = 0.35, 120 V, 60 VA, inductive100000 cycles AC-15, cos phi = 0.35, 240 V, 120 VA, inductive300000 cycles AC-15, cos phi = 0.35, 120 V, 18 VA, inductive300000 cycles AC-15, cos phi = 0.35, 240 V, 36 VA, inductive100000 cycles AC-14, cos phi = 0.7, 120 V, 120 VA, inductive100000 cycles AC-14, cos phi = 0.7, 240 V, 240 VA, inductive300000 cycles AC-14, cos phi = 0.7, 120 V, 36 VA, inductive300000 cycles AC-14, cos phi = 0.7, 240 V, 72 VA, inductive100000 cycles DC-12, 24 V, 48 W, resistive300000 cycles DC-12, 24 V, 16 W, resistive100000 cycles DC-13, 24 V, 24 W, inductive (L/R = 7 ms)300000 cycles DC-13, 24 V, 7.2 W, inductive (L/R = 7 ms) |
| Switching frequency: | 20 switching operations/minute with maximum load |
| Mechanical durability: | 20000000 cycles for relay output |
| Minimum load: | 1 mA at 5 V DC for relay output |
| Protection type: | Without protection at 5 A |
| Reset time: | 1 s |
| Memory capacity: | 256 kB for user application and data RAM with 10000 instructions256 kB for internal variables RAM |
| Data backed up: | 256 kB built-in flash memory for backup of application and data |
| Data storage equipment: | 2 GB SD card (optional) |
| Battery type: | BR2032 lithium non-rechargeable, battery life: 4 year(s) |
| Backup time: | 1 year at 25 °C (by interruption of power supply) |
| Execution time for 1 KInstruction: | 0.3 ms for event and periodic task |
| Execution time per instruction: | 0.2 µs Boolean |
| Exct time for event task: | 60 µs response time |
| Maximum size of object areas: | 512 %M memory bits512 %KW constant words8000 %MW memory words255 %C counters255 %TM timers |
| Realtime clock: | With |
| Clock drift: | |
| Regulation loop: | Adjustable PID regulator up to 14 simultaneous loops |
| Counting input number: | 4 fast input (HSC mode) at 100 kHz 32 bits |
| Control signal type: | Single phasePulse/directionA/B |
| Integrated connection type: | USB port with mini B USB 2.0 connectorNon isolated serial link serial 1 with RJ45 connector and RS485 interface Non isolated serial link serial 2 with RJ45 connector and RS232/RS485 interface |
| Supply: | (serial)serial link supply: 5 V, |
| Transmission rate: | 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS4851.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232480 Mbit/s for USB |
| Communication port protocol: | USB port: USB - SoMachine-NetworkNon isolated serial link: Modbus master/slave - RTU/ASCII or SoMachine-Network |
| Local signalling: | 1 LED (green) for PWR1 LED (green) for RUN1 LED (red) for module error (ERR)1 LED (green) for SD card access (SD)1 LED (red) for BAT1 LED (green) for SL11 LED (green) for SL21 LED per channel (green) for I/O state |
| Electrical connection: | removable screw terminal block for inputs removable screw terminal block for outputs terminal block, 3 terminal(s) for connecting the 24 V DC power supply connector, 4 terminal(s) for analogue inputsMini B USB 2.0 connector for a programming terminal |
| Maximum cable distance between devices: | Shielded cable: Unshielded cable: Unshielded cable: Unshielded cable: |
| Insulation: | Between input and internal logic at 500 V ACNon-insulated between analogue input and internal logicNon-insulated between analogue inputsBetween supply and ground at 1500 V ACBetween sensor power supply and ground at 500 V ACBetween input and ground at 500 V ACBetween output and ground at 1500 V ACBetween supply and internal logic at 2300 V ACBetween sensor power supply and internal logic at 500 V ACBetween output and internal logic at 2300 V ACBetween Ethernet terminal and internal logic at 500 V ACBetween supply and sensor power supply at 2300 V AC |
| Marking: | CE |
| Sensor power supply: | 24 V DC at 250 mA supplied by the controller |
| Mounting support: | Top hat type TH35-15 rail conforming to IEC 60715Top hat type TH35-7.5 rail conforming to IEC 60715 plate or panel with fixing kit |
| Height: | 90 mm |
| Depth: | 70 mm |
| Width: | 160 mm |
| Product weight: | 0.456 kg |
In short
Reference TM221C40R
Product Name controller M221 40 IO relay - TM221C40R
Related Categories
