SCHNEIDER
Direct online starter, TeSys island, 30A AC-1, 25A AC-3, 11kW / 15hp - TPRST025
TPRST025
€138.96 Excl. Tax
€166.75 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
Supply in process – Average delivery time 4/6 weeks
- Technical support and dedicated single point of contact
- Free delivery from 200€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range: | TeSys |
|---|---|
| Product name: | TeSys island |
| Device short name: | TPRST |
| Product or component type: | Motor starter |
| Motor starter type: | Direct on line |
| Device presentation: | Direct starter connected to an automation controller through a bus couplerOperational only when connected to a bus coupler |
| Function available: | Upstream voltage presence detectionElectrical line and load protectionPower and energy monitoring when connected with TPRVM voltage module |
| Product compatibility: | TPRBC bus couplerTPRVM voltage interface module |
| Poles description: | 3P (3 NO) |
| Utilisation category: | AC-1AC-2AC-3AC-4 |
| Motor power kW: | 5.5 kW at 230 V 50 Hz (AC-3)11 kW at 380...415 V 50 Hz (AC-3)11 kW at 440 V 50 Hz (AC-3)15 kW at 500 V 50 Hz (AC-3)15 kW at 690 V 50 Hz (AC-3) |
| Motor power hp: | 2 hp at 120 V AC 60 Hz for 1 phase motors3 hp at 240 V AC 60 Hz for 1 phase motors7.5 hp at 208 V AC 60 Hz for 3 phases motors7.5 hp at 240 V AC 60 Hz for 3 phases motors15 hp at 480 V AC 60 Hz for 3 phases motors20 hp at 600 V AC 60 Hz for 3 phases motors |
| [Ue] rated operational voltage: | |
| [Ie] rated operational current: | 25 A (at 30 A (at |
| [Ith] conventional free air thermal current: | 30 A (at 50 °C) |
| [Ui] rated insulation voltage: | 690 V conforming to IEC 60947-4-1600 V conforming to UL 60947-4-1600 V conforming to CSA C22.2 No 60947-4-1 |
| [Uimp] rated impulse withstand voltage: | 6 kV conforming to IEC 60947-1 |
| Overvoltage category: | III for Ue II for Ue |
| Thermal protection adjustment range: | 0.5...25 A |
| Thermal overload class: | Class 5...30 |
| Reset: | Remotely or automatically |
| Irms rated making capacity: | 450 A at 440 V conforming to IEC 60947 |
| Rated breaking capacity: | 450 A at 440 V conforming to IEC 60947 |
| [Icw] rated short-time withstand current: | 380 A 40 °C - 1 s240 A 40 °C - 10 s120 A 40 °C - 1 min50 A 40 °C - 10 min |
| Average impedance: | 2 mOhm - Ith 30 A 50 Hz |
| Power dissipation per pole: | 1.25 W AC-3 - Ith 25 A1.8 W AC-1 - Ith 30 A |
| [Uc] control circuit voltage: | 24 V DC supplied by the bus coupler |
| Current consumption: | 160 mA contactor sealed160 mA contactor closing |
| Power dissipation in W: | 6.6 W at Ie AC-3 |
| Mechanical durability: | 30 Mcycles |
|---|---|
| Electrical durability: | 1.65 Mcycles 25 A AC-3 at Ue 440 V2 Mcycles 30 A AC-1 at Ue 440 V |
| Maximum operating rate: | 3600 cyc/mn AC-3 |
| Operating time: | |
| Safety reliability level: | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| Protection type: | Thermal overload protectionMotor overheatOvercurrentUndercurrentJamLong startStallRapid cycle lockoutRapid restart lockoutPhase sequencePhase reversalPhase lossPhase unbalanceGround current |
| Metering type: | Time device ONTime device switch ONNumber of faultsNumber of switching cyclesNumber of device power cyclesAverage current IavgAverage voltage VavgMax current ImaxMax voltage VmaxActive and reactive power with voltage moduleActive and reactive energy with voltage moduleTrue power factor with voltage module |
| Local signalling: | 1 LED (green/red) for DS (device status)1 LED (green/red) for LS (load status) |
| Standards: | EN/IEC 60947-1EN/IEC 60947-4-1UL 60947-4-1CSA C22.2 No 60947-4-1 |
| Product certifications: | CCCULCSAEAC |
| Mounting mode: | Horizontal and vertical (35 mm symmetrical DIN rail) |
| Connections - terminals: | Screw-clamp terminals 1 cable(s) 1.5...10 mm² (AWG 16...AWG 8) rigidScrew-clamp terminals 2 cable(s) 1.5...10 mm² (AWG 16...AWG 8) rigidScrew-clamp terminals 1 cable(s) 2.5...10 mm² (AWG 14...AWG 8) flexible without cable endScrew-clamp terminals 2 cable(s) 2.5...10 mm² (AWG 14...AWG 8) flexible without cable endScrew-clamp terminals 1 cable(s) 1.5...10 mm² (AWG 16...AWG 10) flexible with cable endScrew-clamp terminals 2 cable(s) 1.5...6 mm² (AWG 16...AWG 10) flexible with cable end |
| Tightening torque: | 2.5 N.m - with screwdriver flat Ø 6 mm2.5 N.m - with screwdriver Philips No 3 |
| Width: | 45 mm |
| Height: | 121 mm |
| Depth: | 115 mm |
| Net weight: | 0.718 kg |
In short
Reference TPRST025
Product Name Direct online starter, TeSys island, 30A AC-1, 25A AC-3, 11kW / 15hp - TPRST025
Range TeSys
Related Categories
