SCHNEIDER
module XPSAK - Emergency stop - 230 V AC - XPSAK371144
XPSAK371144
Product not available. Here is the equivalent reference that we offer : Preventa XPSU - XPSUAK32AP
Technical informations
| Range of product: | Preventa Safety automation |
|---|---|
| Product or component type: | Preventa safety module |
| Safety module name: | XPSAK |
| Safety module application: | For emergency stop, switch, sensing mat/edges or safety light curtain monitoring |
| Function of module: | Multiple emergency stop monitoring 2-channel wiringProximity sensor monitoringMonitoring of a movable guardSensing mat and edges monitoringEmergency stop with 2 NC contacts monitoring 2-channel wiringEmergency stop monitoring 1-channel wiringMonitoring of a movable guard associated with 2 switches and automatic startMonitoring of electro-sensitive protection equipment (ESPE) |
| Safety level: | Can reach PL e/category 4 conforming to EN/ISO 13849-1Can reach SILCL 3 conforming to EN/IEC 62061 |
| Safety reliability data: | DC > 99 % conforming to EN/ISO 13849-1MTTFd = 154.5 years conforming to EN/ISO 13849-1PFHd = 7.39E-9 1/h conforming to EN/IEC 62061 |
| Type of start: | Configurable |
| Connections - terminals: | Captive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² flexible with cable end, with double bezelCaptive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² solid with cable end, with double bezelCaptive screw clamp terminals, 1 x 0.25...1 x 1.5 mm² flexible with cable end, with double bezelCaptive screw clamp terminals, 1 x 0.25...1 x 2.5 mm² flexible with cable end, with double bezelCaptive screw clamp terminals, 2 x 0.14...2 x 0.75 mm² flexible with cable end, with double bezelCaptive screw clamp terminals, 2 x 0.14...2 x 0.75 mm² solid with cable end, with double bezelCaptive screw clamp terminals, 2 x 0.25...2 x 1 mm² flexible with cable end, with double bezelCaptive screw clamp terminals, 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel |
| Output type: | Relay instantaneous opening, 3 NO circuit(s), volt-free |
| Number of additional circuits: | 1 NC + 4 solid state outputs |
| [Us] rated supply voltage: | 230 V AC - 15...10 %24 V DC - 15...10 % |
| Synchronisation time between inputs: | Unlimited (manual start)2 or 4 s depending of wiring (automatic start) |
|---|---|
| Supply frequency: | 50/60 Hz |
| Maximum power consumption in VA: | 6 VA AC |
| Input protection type: | Internal, electronic |
| [Uc] control circuit voltage: | 24 V DC |
| Maximum line resistance: | 28 Ohm |
| Breaking capacity: | 180 VA holding AC-15 C300 relay output1800 VA inrush AC-15 C300 relay output |
| Breaking capacity: | 1.5 A at 24 V (DC-13) time constant: 50 ms for relay output |
| Output thermal current: | 6 A per relay for relay output |
| [Ith] conventional free air thermal current: | 18 A |
| Associated fuse rating: | 4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 2006 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200 |
| Minimum output current: | 10 mA for relay output |
| Minimum output voltage: | 17 V for relay output |
| Maximum response time on input open: | 40 ms |
| [Ui] rated insulation voltage: | 300 V (pollution degree 2) conforming to IEC 60947-5-1300 V (pollution degree 2) conforming to DIN VDE 0110 part 1 |
| [Uimp] rated impulse withstand voltage: | 4 kV overvoltage category III conforming to IEC 60947-5-14 kV overvoltage category III conforming to DIN VDE 0110 part 1 |
| Local signalling: | 4 LEDs |
| Current consumption: | 30 mA at 24 V AC on power supply |
| Mounting support: | 35 mm symmetrical DIN rail |
| Product weight: | 0.4 kg |
In short
Reference XPSAK371144
Product Name module XPSAK - Emergency stop - 230 V AC - XPSAK371144
Related Categories