SCHNEIDER
Télémécanique inductive sensor XS4 M30 - L62mm - PPS - Sn15mm - 12..48VDC - cable 2m - XS4P30PA370
XS4P30PA370
€43.33 Excl. Tax
€52.00 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
In stock more than 25 units – Dispatched within 24/48h
- Technical support and dedicated single point of contact
- Free delivery from 200€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
Range of product: | Telemecanique Inductive proximity sensors XS |
---|---|
Series name: | General purpose |
Sensor type: | Inductive proximity sensor |
Sensor name: | XS4 |
Sensor design: | Cylindrical M30 |
Size: | 62 mm |
Body type: | Fixed |
Detector flush mounting acceptance: | Non flush mountable |
Material: | Plastic |
Type of output signal: | Discrete |
Wiring technique: | 3-wire |
[Sn] nominal sensing distance: | 15 mm |
Discrete output function: | 1 NO |
Output circuit type: | DC |
Discrete output type: | PNP |
Electrical connection: | Cable |
Cable length: | 2 m |
[Us] rated supply voltage: | 12...48 V DC with reverse polarity protection |
Switching capacity in mA: | |
IP degree of protection: | IP68 double insulation conforming to IEC 60529 |
Thread type: | M30 x 1.5 |
---|---|
Detection face: | Frontal |
Front material: | PPS |
Enclosure material: | PPS |
Sensing range: | > 8...15 mm |
Operating zone: | 0...12 mm |
Differential travel: | 1...15% of Sr |
Cable composition: | 3 x 0.34 mm² |
Wire insulation material: | PvR |
Status LED: | Output state: 1 LED (yellow) |
Supply voltage limits: | 10...58 V DC |
Switching frequency: | |
Maximum voltage drop: | |
Current consumption: | 0...10 mA no-load |
Maximum delay first up: | 10 ms |
Maximum delay response: | 0.3 ms |
Maximum delay recovery: | 0.7 ms |
Marking: | CE |
Threaded length: | 52 mm |
Height: | 30 mm |
Length: | 62 mm |
In short
Reference XS4P30PA370
Product Name Télémécanique inductive sensor XS4 M30 - L62mm - PPS - Sn15mm - 12..48VDC - cable 2m - XS4P30PA370
Device function -
Related Categories