SCHNEIDER
ClimaSys forced vent. IP54, 85m3/h, 48V DC, with outlet grille and filter G2 - NSYCVF85M48DPF
NSYCVF85M48DPF
175,08 € HT
210,10 € TTC
HT
HT
TTC
TTC
Vous économisez
En stock – Expédié sous 24/48h
- Support technique et interlocuteur unique dédié
- Livraison offerte dès 200€ d’achat (France Métropolitaine)
- Paiements 100% sécurisés
Informations techniques
| Range : | ClimaSys |
|---|---|
| Product name : | ClimaSys CV |
| Product or component type : | Fan |
| Type of ventilation filter : | Standard |
| Air flow : | Free flow rate with standard filter: 79 m3/h |
| [Us] rated supply voltage : | 25...55.2 V |
| Input voltage : | 48 V DC |
| Power range : | 8 W |
|---|---|
| [In] rated current : | 0.173 A |
| Noise level : | 46...49 dB |
| Bearing type : | Ball |
| Height : | 170 mm external: |
| Width : | 150 mm external: |
| Depth : | 62 mm external: |
| Cut-out dimensions : | 125 x 125 mm |
| Product weight : | 0.48 kg |
| Material : | Outlet grille: injected thermoplastic (ASA PC) |
| Colour : | Outlet grille: grey (RAL 7032) |
| Ambient air temperature for operation : | -10...70 °C |
| Ambient air temperature for storage : | -40...70 °C |
| Maximum pressure : | 50 Pa flow rate 0 m³/h |
| Connections - terminals : | Cable |
| IP degree of protection : | IP54 |
| Device composition : | 1 axial motor2 protective grille: on the front and rear surfaces1 filter: front of axial motor1 outlet grille: front1 cut-out template1 power cord |
| Condition of use : | Surrounding environment must be relatively cleanFilter must be cleaned and replaced regularlyOutside temperature must be 5 °C lower than inside temperatureOverfrequent filter replacement should be avoidedFlow rates depends on the work point, see ProClima software |
En bref
Référence NSYCVF85M48DPF
Nom du produit ClimaSys forced vent. IP54, 85m3/h, 48V DC, with outlet grille and filter G2 - NSYCVF85M48DPF
Catégories associées
